Tuesday, July 2nd, 2019

Eight Ways to Keep Your Bathroom Mold and Mildew Free 

Mold and mildew in your bathroom isn’t just smelly and unsightly, it can also lead to health issues if not treated. Luckily, mold and mildew growth is also easy to control and eliminate. 

One of the best ways to tackle mold and mildew growth in your home is to not let it happen in the first place. But sometimes that’s easier said than done – especially in the humid summer months. 

Here are eight ways to keep mold and mildew at bay. 

Avoid leaks. One of the top causes of mold in the bathroom are from  leaks from faucets or showerheads. Even a small leak can lead to mildew and mold growth. As soon as you detect a leak, locate the source and get it repaired. While you may be able handle a small leak repair on your own, it’s best to contact a plumber if the leak is major. 

Use proper ventilation. Your bathroom should be equipped with a fan or ventilation system to reduce moisture caused from steam and heat. Always use your bathroom’s fan after bathing or showering and keep it turned on until all the humidity and any dampness is gone. If you’re concerned you don’t have adequate ventilation in your bathroom, it’s time to get a professional opinion.

Do a grout check. Look regularly at the grout surrounding your bathtub and shower, sinks and toilets. It’s a good idea to check the grout around tilework as well. Grout should completely seal spaces. If it doesn’t and there are open spots or holes, use grout sealer to fill in those places. This will keep bacteria and mold from growing. 

Replace old shower liners. Shower liners are one of the most common sources for mold and mildew, however,  liners are inexpensive enough that you could ideally replace them every few months. An alternative is to wash them thoroughly every week. 

It’s also a good idea to wash shower curtains, rugs and linens on a regular basis as well. Or, purchase a mildew and mold resistant shower curtain and liner.   

Wipe down the shower. Have a sponge on hand, as well as some shower and bathtub cleaner, when you shower, so that afterwards, you can quickly spray and wipe down the tile and grout. You can keep the spray bottle in the shower, stored with your other bath and shower products.  

Do a major bathroom clean regularly.  While wiping your bathtub and shower often can help with day-to-day mold management, make sure to schedule time to thoroughly clean your bathroom at least once a week. Use a heavy-duty cleaning solution for the shower and bathtub, and take this time to inspect the bathroom for mold, and for leaks as well. 

Control the humidity. To reduce mold and mildew, homes should remain below 50% humidity at all times. Invest in a dehumidifier if needed.  

Store away soaps and shampoos. Mold and mildew can hide on bottles of shampoos, soap containers, toys, and almost anything else that stays in the shower or the bathtub. Make sure to wash and dry all bottles after showering, or better yet, keep them stored in a dry area within easy access when you’re showering.